Rena DA615 Manual de Instruções descarregar pdf (Página 16)

DA615 Operations Manual 3 Rev. 3/23/00

HOW TO CORRECTLY INSTALL CARTRIDGES

When inserting a cartridge, keep the cartridge as upright as possible (Figure 4). Push the cartridge straight back into

the Printhead Carriage, until it just touches the Cartridge Securing Clip. Then push down on the cartridge, until it

bottoms out. While pressing the cartridge down, push back at the base of the cartridge (Figure 5) until the cartridge’s

Foot (Figure 7) is positioned completely behind the Bar (Figure 8). Now press back lightly on the top of the cartridge

(Figure 6) until it snaps securely under the Cartridge Securing Clip (Figure 9). Do not use a lot of force to seat the

cartridge.

CAUTION: Pushing the top of the cartridge back before the cartridge is properly seated will damage the Securing Clip

HOW TO CORRECTLY REMOVE CARTRIDGES

When removing a cartridge, pull the top of the cartridge out (Figure 10) just enough to release it from the Cartridge

Securing Clip (Figure 11). Then lift the cartridge up and out of the Printhead Carriage (Figure 12).

Figure 7

Figure 8

Bottom View

Figure 9

Figure 4 Figure 6 Figure 5

Figure 10 Figure 11 Figure 12

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 53 54

Sem comentários

Rena DA615 Manual de Instruções Página 16